Accessories
Hortensia bladeren
Met de hand gemaakt Eucalyptus takje
Deze wilgentak is ongeveer 10cm lang (voor de L versie) en 6cm (voor de kleine versie) en met de hand gemaakt. De kleine versie is als paar verkocht
Met de hand gemaakt roos met een doorsnee van ongeveer 6mm
Met de hand gemaakte klaproos in 2 kleuren te koop. De bloem heeft een doorsnee van ongeveer 1cm
Decorative Large Jug
Paspop kind (staande en zittende)
A selection of beautful French door funiture. I always think that it is the little detail that finish off a room so I have developed a small range of pretty French door harware. Among the selection are cremones. These are locking handles that can be applied to both doors and windows. You will need to add addtional dowel to them and a bead at the top and the bottom to simulate a catch. To purchase the design simply choose from the drop down menu and the image of the handle will appear then choose quanitity. Some are left and right handed. Prime with a metal primer then finish in your choice of finishes. Some would look spectacular highlighted in gilt with a black base. All designs are copies of original French door and window furniture. Sizes A = 1.6CM TALL X 0.2CM WIDE There is a left and a right to this design.B = 2.2CM TALL X 0.4CM WIDEC = 1.2CM X 0.8CM (RIM LOCK ADDITIONAL)D = 0.8CM DIAMETER BASE PLATEE = 2CM TALL X 1.8CM WIDEF = 1.2CM X 1.2CMG = 0.9CM DIAM OF BACK PLATE X 1CM LENGTH OF HANDLE There is a left and a right to this design.H = 1CM TALL X 0.5CM WIDE (BACK PLATE) There is no left and right to this design
Cherub Candlesticks
This type of statue you do not see everwhere, however they are always fun to see. This statue is unpainted and made of resin
Welcome Bunny
These daisys are handmade and about 1cm in diameter. They are mounted on a metal stick. Verkocht per paar
Deze handgemaakte plant heeft takken van ongeveer 8 cm en wordt verkocht in een pot. De pot kan afwijken van die op de foto.
Met de hand gemaakt Hertshoorn in vaas. De plant en vaas is ongeveer 4cm hoog en 5cm breed.
Size option:
Approx 2.5cm high
Oval base 4cm x 2.5cm,
Height of the cooking pot 1.2cm
The Pig and And Piglets Tureen is amongst some of my more quirky and pretty items. The ideas for the Tureen can be simple to the most exciting....simply painting the Tureen and displaying it on the shelf or filling it with a wonderful rich gravy and meat with some of the juices burnt and cascading over the side of it.
The item is supplied unpainted and in an off white almost alabaster type resin finish. It will be supplied ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.
Home / Toaster Early 20th century
Toaster Early 20th century
Made from lead free pewter alloy
Size: 2cm high x 2cm wide
Home / KITCHEN / 12th scale Bread Bin
12th scale Bread Bin slightly age
This is a fine delicate bread bin with removeable lid little side handles. On one side of the bin is the wording: bread bin.
The bread Bin is made from metal and weight approx. 13g
Size is approx. 3cm wide x 2.1cm deep x 2.3cm high (includes lid)
Bunny Tureen unfinished (Small)
Unless using it for 24th scale the small tureen is ideal as a soup bowl with a lid.
The larger tureen is ideal for a small rabbit pie or maybe for carrots! Dont bunnies like carrots!
Size option:
Small 1.5cm tall x 1.5cm diameter
Large 2.2cm tall x 2.3cm diameter
The tureens are amongst some of my more quirky and pretty items. The ideas for the Tureen can be simple to the most exciting....simply painting the Tureen and displaying it on the shelf or filling it with a wonderful rich gravy and meat with some of the juices burnt and cascading over the side of it.
The item is supplied unpainted and in an off white almost alabaster type resin finish. It will be supplied ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.
Piping Syringe for icing unfinished or aged
Total length 2.5cm
The item is supplied unfinished or aged. If supplied unaged it will be ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.
Made from lead free pewter alloy.
Pretty Antique Provence Patterned edged coffee pots (2 sizes)
Incredibly fine and detailed tiny tea cups with saucers (2 designs) and mug.
These tiny cups (to scale as far as casting processes allow) are perfectly formed and look beautiful when painted.
The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.
The price is for one - use the drop down menu to select quantity then add them to your basket.
Finishes:
Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").
I have photographed them for you in both the unpainted state, a painted finish with a brown wash to age them and also a polished pewter finish. If you choose to paint then age them then try a pale cream, off white colour and then using raw or burnt umber (watered down) wipe them over to create a warm aged appearance.
Cup and saucer design 1 - 7.5mm diameter at widest part (not including the handle) x 5.9mm
Cup and saucer design 2 - 8.3mm diameter ot widest part (not including the handle) x 6.9mm High
Mug - 8.6mm high x 6.5mm
Saucer - 11.5mm diameter x 0.7mm thick
Cups and mugs are between 0.6 and 0.8mm thick
Pretty Antique Provence bowls unfinished
Size
Small bowl 8mm high x 13mm external diameter
These beautiful little bowls are part of the Antique Provence range and come unfinished in dull pewter.
Pretty Antique Provence Patterned edged Gavy Boat
The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.
The price is for one - use the drop down menu to select quantity then add them to your basket.
Finishes:
Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").
I have photographed them for you in both the unpainted state and a painted finish with a brown wash to age them. If you choose to paint then age them then try a pale cream as a main base colour and then using raw or burnt umber (watered down) wipe them over to create a warm aged appearance.
9mm high x Main body 9mm x 12mm x 0.6mm thick
Pretty Antique Provence Teapot
Size
Approx. 16mm tall x 17mm wide
This beautiful little teapot is part of the Antique Provence range and has a removable lid ready for some tea and comes unfinished in dull pewter.
The pewter can be polished or painted. If painting please apply a thin layer of metal primer. This will help the coat of paint adhere to the surface.
12th scale Carpet Beater
20mm wide (18mm diam) x 60mm long
When your carpet needs to be dusted hang it up and give it a bash with this carpet beater.
Made from metal and ready for paiting.
Sparrow Tureen unfinished
2cm tall (pot without the lid) x 2.5cm diameter at opening- the perfect size for a nice juicy casserole!
Adorned with flowers and leaves in the prettiest of patterns wth a little bird (possibly a sparrow) resting on a tiny branch on the lid. The sparrow is of course the handle for the lid and the sidehandles are twisted branches.
The tureens are amongst some of my more quirky and pretty items. The ideas for the Tureen can be simple to the most exciting....simply painting the Tureen and displaying it on the shelf or filling it with a wonderful rich gravy and meat with some of the juices burnt and cascading over the side of it.
The item is supplied unpainted.
Mum had these! And some of us will still own them although nonstick may have taken over!
The baking tray for small cakes is ideal if you are wanting to produce fairy cakes or maybe madeleines
3cm x 3cm
12th scale French Canopy Bed Kit
The real lifesize 18th century French Canopy bed or "lit à baldaquin" can be found
in the "Musee-cognacq-jay". https://www.parismuseescollections.paris.fr/fr/musee-cognacq-jay/oeuvres/lit-a-la-polonaise#infos-principales.
The bed is an almost exact copy of the Museum piece. The instructions for my 12th scale version can be found in this listing. It is truly something that you can bring to life and certainly a statement item of furniture in any dollshouse but equally would look fabulous under a glass dome!
Size:
Height 20cm
External width 11.5cm
External length 16cm
Height to top of finials 13cm
As a contrast to my normal work I have created my sample in need of a make over...maybe the addition of some gold leaf and reupholstery is required? The bed would look fabulous guilded and draped in silk damask or maybe a pretty floral 18th century silk. The design lends itself to both opulent and Swedish Gustavian.
The bed is supplied as a kit and is relatively easy to construct but the upholstery has to be part of the process. The bed ends and the bottom of the bed all require covering in Fabric and will need to be done after it has been painted and before fully constructed.
Cat Hooks
This item is supplied unpainted.
The item is made of resin.
Approx 6cm long
Made from Resin
Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.
Acorn hooks
This item is supplied unpainted.
The item is made of resin.
Size approx. 1.6 high x 1cm wide
KIT 12th scale Large Kitchen Dresser supplied with metal handles unpainted
Kit and handles are unpainted
12th scale
The top and the bottom are NOT seperate
Made from MDF
SIZES
Bottom section: 26.3cm wide x 6.9cm deep x 7.7cm high
Top section: 26.9cm wide (at top) x 10cm high c 3.5cm deep
Top section shelf/recessed area: 6cm wide x 2.2cm deep x 2cm high
Total height approx. 17.7cm high x 6.9cm deep x 26.9cm wide
Ready to be assembled using woodglue or similar (glue not supplied). Attach handles with superglue. The kit is not painted.
18th Century Wine Cooler 12th scale Unpainted
This item is supplied unpainted
In two parts
Resin
Approx 3cm high
Made from Resin
Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.
De Vintage dressoir een echt oudje.
Gevonden op internet en we mochten hen namaken.
Geen tweede op de wereld te vinden, behalve de onze dan in mini !
De dressoir is ongeveer 11 cm hoog, 14 cm breed en 3 cm diep en is van MDF gemaakt. Alle accessoires als gezien in de foto's zijn niet inbegrepen
Gorgeous late 18th century wall lantern with arm 12th scale kit
This item is supplied unpainted.
The item is made of resin and is not wired
If you wish to wire the lantern you will need to run a wire along the outside of the armand glue a support for the bulb placement.
Approx 9cm high x 2.9cm deepest part x base of lantern to bottom of the rod 4cm
Made from Resin
Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.
Pretty Antique Provence Patterned edged Plates (2 sizes)
The pretty wavy edge and the embellishments on the border of the plate make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.
The price is for one plate - use the drop down menu to select quantity then add them to your basket.
Finishes:
Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").
I have photographed them for you in both the unpainted state, a painted finish with a brown wash to age them and also a polished pewter finish. If you choose to paint then age them then try a pale cream, off white colour and then using raw or burnt umber (watered down) wipe them over to create a warm aged appearance.
Small 16mm diameter (0.6mm thick)
Medium 20mm diameter (0.7mm thick)
Large 25mm diameter (0.8mm thick)
12th scale bunch of keys
Length 20mm include the loop
A lovely bunch of old keys to hang off your door or hook - a really lovely addition to a scene.
Made from metal and ready for painting.
Unpainted Firescreen ready for image or upholstery French 19th Century
Unpainted metal
12th scale
Rear has recess for image or tapestry
SIZES (are approx)
Height: 8.5cm or 2.5"
Width: 7.5cm or 3"
Opening for print or tapestry 5.5cm or 2" wide x 5cm or 2" high
The kit is not painted.
19th Century Radiator Kits ~ UNPAINTED 12th scale
This very pretty and realistic radiator is designed so that you can create any desired width. Each panel is about 0.8cm or 0.34" wide x 6.7cm or 2.64" high. You will need two end panels sold as a kit and then somple add the central sections. Width options are available in the dropdown menu or you can choose your own quanities.
The little tap and valves and joining pegs are all seperate making this a truly fun kit to assemble. It is easy too!
Unpainted metal - ideal for polishing
These are solid and quite heavy
12th scale
Build your own radiator to any length
Choose the end kit (the one with legs) then add the central sections
SIZES (are approx)
Height of radiator 6.7cm or 2.64"
Depth of radiator 1.6cm or 0.65"
Variations on width:
3 panel radiator 2.2cm or 0.86"
5 Panel radiator 4.3cm or 1.7"
The kit is not painted.
12th scale Spiral staircase kit.
This simply beautiful spiral staircase is copied from a Polish original found in an abandoned house. This is the same staircase that we (Mini Vintage) have used in our Old Mill prototype. In the old Mill we use a 'Bottom Section' + 14 'Step Kits' as described below. This product as available on the Mini Vintage site is sold as 'one kit' suitable for use in the 'the Old Mill'. If you would like any different configuration then please order via www.alisondaviesminiatures.co.uk
Each step has stunning filligree and comes with a beautiful bannister post and rail.
The bottom step is slightly different to the other steps as it has a little base finial to finish it off.
The staircase is sold in "steps" with a bottom step option.
Each step measures approx. 15.25mm high x 37mm deep x 68mm wide
The Upright posts are approx. 81mm high with the handrail adding another 2mm to the height.
Bottom Step Kit contents:
1 x step
1 x Bottom hand rail (this is the longer handrail)
1 x Short top handrail
2 x Bannister posts
1 x Little floor flange
1 x Length 12" steel rod (for you to cut to size) (not shown)
Step kit contents:
1 x step
1 x Bannister post
1 x handrail section
Construction
This is a slightly harder kit to construct as it has to be supported during the build.
You will need superglue and a superglue activator (this simply sets the glue instantly and makes the whole job easier).
Always start with the bottom step but it can be constructed outside of the dolls house and then inserted when finished. Your only issue might be that you wont be able to secure the central rod into the floor and the ceiling. Ideally the floor would be added after the stairs are in position.
Sold in kit form these wonderful ceiling candelabras are stunning and would certainly make a statement in any 18th century or later room. In particular if you have a long thin room with a statementdining table then two at either end would be superb.
These are not electrified but the candle holders have been designed to accept a small candle bulb and therefore with a little bit of effort and time these could be electified.
Size
Large 76mm tall x 78mm wide
Home / KITCHEN / Pair Pretty Antique Provence salt and pepper pots unfinished
Pair Pretty Antique Provence salt and pepper pots unfinished
Size
Approx. 5mm tall
These beautiful little salt and pepper pots are part of the Antique Provence range and come unfinished in dull pewter.
The pewter can be polished or painted. If painting please apply a thin layer of metal primer. This will help the coat of paint adhere to the surface.
12th scale weight scales
Length 20mm (including dish) x 17mm diam of dish.
The little kitchen scale would be ideal in a messy kitchen table scheme. It comes in 4 sections, the large base, the star shaped dish supports, the dial face (not the dial) and the dish. To create a glass face try using doming resin. It's incredible stuff. Simply mix the two parts together 1:2 and then using a cocktail stick drip it onto the dial face...the beauty is that it remains raised like a dome...it's very realistic. You can buy button/dome resin online
Made from metal and ready for painting.
Food Scoop
3cm long x 0.9cm wide
Whether scooping for flour or grain this is the perfect sized scoop and ideal for use in a shop.
Made from metal and ready for paiting.
The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.
Finishes:
Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").
Size : Medium 24mm high to top of lid x 24mm diameter (widest part not including handles)
Free Standing Rectangular frames
Large 2.7cm x 5.3cm (oval 2cm x 3cm)
Mediuml 2.3cm x 4.5cm (oval 2.2cm x 2.5cm)
Supplied unpainted in an easy to assemble kit with the frame and the rear support seperate ready for gluing together.
These frames are so versatile and can be placed in almost any room in the house and set off a scene perfectly. They could contain small portraits or maybe silhouettes. Available in 4 sizes with possibly the small size being the most obvious choice if you are not sure which size to choose.
Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.
Made from either metal or resin (metal shown in image).
Pretty Antique Provence Patterned edged jug
Ideal jugs for loads of uses - the little one is a milk jug and ideal for anyone who wants to serve coffee with milk.
The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.
Pretty Antique Provence Patterned edged jug
Ideal jug for loads of uses including holding a display of pretty flowers.
The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.
The price is for one
15mm high x 12mm diameter x 0.6mm thick
Oude winkel uithangborden verkrijgbaar in verschillende vormen en uitvoeringen – deze zie je tegenwoordig niet vaak meer.
We hebben gekozen voor borden zoals je die vroeger bij echt oude winkels zag. Je kunt echter zelf tekst toevoegen aan de blanco borden, geheel naar wens.
De borden met één steun zijn 5 cm breed, en die met twee steunen zijn 9 cm breed. De borden zijn uitgesneden uit 2 mm MDF en zijn heel eenvoudig in elkaar te zetten.
In Nederland worden klompen aan het einde van een werkdag in zulke rekken geplaatst, klaar voor de volgende werkdag.
Het rek is verkrijgbaar in 2 vormen (groot en klein). De Kleine heeft ruimte voor 4 paar klompen en is ongeveer 12 cm lang, de grote heeft ruimte voor 6 paar klompen en is ongeveer 15cm lang
