Pretty 18th century Cradle unpainted kit

18th Century Wicker Picnic Basket unpainted

19th Century Swan Bench 12th scale Unpainted KIT

19th Century Swan Bench  

This item is supplied as a kit and unpainted.
The item is made of mdf and resin. It is a very simple to assemble kit. 
This item is not supplied with glue or paints. 
Approx 13.8cm wide x 5.7cm deep x 8.2cm high

KIT DOG Stick/Umbrella Stand French 19th Century unpainted

BRANCH and BELL with birds unusual dish 18th Century Unpainted

19th Century PAIR OF PARROT CANDELABRAS 12th scale Unpainted

Underwood Typewriter 12th scale

French 19th Century HAT STAND 12th scale UNPAINTED

Large Dovecot for the wall 12th scale Unpainted KIT

Long SCANDINAVIAN 19th century BENCH 12th scale Unpainted KIT

19th century wall BELL 12th scale kit

Separate cake stands 12th scale kit

18th Century Standing mannequin 12th scale Unpainted KIT

● This item is supplied as a kit and unpainted.
● The item is made of mdf and resin. It is a very simple to assemble kit. 
● This item is not supplied with glue or paints. 
● There are two sizes to choose from : 

● Large - The body is approx 6cm tall and the skirt 8cm (total length 14cm)
● Small - The body is approx 3,3 cm tall and the skirt 4 cm (total length 7cm)

KIT Bathroom Sink with washstand 12th scale

18th Century Letter clasp holder in the shape of a hand 12th scale Unpainted

Victorian Stereoscope viewer with cards

Fire Irons set

18th Century Swan & Shell Dish Small

Unpainted Firescreen ready for image or upholstery French 19th Century

12th scale metal Colander

Louis XVI Armchair circa 1780 ADM

French Cooking Pots (Aged by Mini Vintage)

Shoe Lasts in several forms, painted by Mini VIntage

Diving Helmet

Scale / 6 weights

Louis XVI Sofa circa 1780

Decorative Large Jug

Child Mannequin (Leaning and sitting)

A selection of beautful French door funiture. I always think that it is the little detail that finish off a room so I have developed a small range of pretty French door harware. Among the selection are cremones. These are locking handles that can be applied to both doors and windows. You will need to add addtional dowel to them and a bead at the top and the bottom to simulate a catch. To purchase the design simply choose from the drop down menu and the image of the handle will appear then choose quanitity. Some are left and right handed.

Prime with a metal primer then finish in your choice of finishes. Some would look spectacular highlighted in gilt with a black base. All designs are copies of original French door and window furniture.

Sizes :

A = 1.6CM TALL X 0.2CM WIDE There is a left and a right to this design.
B = 2.2CM TALL X 0.4CM WIDE
C = 1.2CM X 0.8CM (RIM LOCK ADDITIONAL)
D = 0.8CM DIAMETER BASE PLATE
E = 2CM TALL X 1.8CM WIDE
F = 1.2CM X 1.2CMG = 0.9CM DIAM OF BACK PLATE X 1CM LENGTH OF HANDLE There is a left and a right to this design.
H = 1CM TALL X 0.5CM WIDE (BACK PLATE) There is no left and right to this design

Sold in kit form this wonderful 5 armed wall candelabra is a copy from an 18th century design. It is both elegant and opulent. They would look wonderful in almost any 12th sscale room but I think either side of a mirror or painting gives them real focus.

These are not electrified

A very simple kit. The little arms fit neatly into the little holes that are located under the finial. Simply glue them in place and to speed up setting time use a super glue activator.

Size

72mm tall x 33mm wide x 16mm deep

These wonderful candlesticks are available in 2 sizes L = 4cm tall and S = 3 cm tall

The candlesticks are made from resin and are unpainted

This type of statue you do not see everwhere, however they are always fun to see. This statue is unpainted and made of resin

Small tray for home, always useful! The tray (kit) is made of MDF, unfinished and measures 4cm x 1,7cm and 0,8 cm tall

Small tray for home, always useful! The tray (kit) is made of MDF, unfinished and measures 4cm x 1,7cm and 2 cm tall

Welcome Bunny

Due to current high demand, the Old Mill kits can take longer than normal to produce, please be patient.

"The Old Mill" by Mini Vintage is a fully modular 1:12 kit that allows you to build your own unique factory.
You start with a front and end module and put as many extension modules in between as you like. You can also build just a single module, for example, to place against another building.
The great thing about this building is that you can always add modules later or modify the ones you already have. Only the structural items are glued giving you the opportunity to lift the roof and remove one or more walls for accessibility at any time.
The sky is the limit! Build any length you want, for any purpose you can imagine.

All accessories as can be seen in the photos (including drainage/plants/furnature) are not included in the kit. The kit is supplied unassembled and not painted

You can find more information in the product description.

Windows

As standard all of the windows are fixed and they cannot be opened. There is the option to provide windows with a openable section in the middle.

Main window : 10,8 x 15,6 cm, internal window 3,7 x 3,3 cm

Partition Wall

The partition wall is an internal wall that fits between the pillars of the old mill. This allows the mill to be split into sections. The wall is 23 cm wide by 24cm high and contains an openable double door and Perspex ‘glass’

Lift

The factory lift is a non-operational (the internal lift does not have a motor to move it up and down) that has been designed to be placed within the Old Mill from Mini Vintage. The list has 2 doors (openable) on two levels. The ground floor doors are openable and 15,4 cm tall and together 5,7 cm wide. The first floor doors are positioned at a height of 24,2 cm (corresponding to the first floor of the Old Mill) and the doors are 9,7cm tall and together 5.7cm wide.
Inside the lift there is a lift cabin that can be connected by a cord and attached to a cog wheel (non-operational) at the top of the lift

Home / Toaster Early 20th century

Toaster Early 20th century

Made from lead free pewter alloy


Size: 2cm high x 2cm wide

Home / KITCHEN / 12th scale Bread Bin

12th scale Bread Bin slightly age

This is a fine delicate bread bin with removeable lid little side handles. On one side of the bin is the wording: bread bin.

The bread Bin is made from metal and weight approx. 13g

Size is approx. 3cm wide x 2.1cm deep x 2.3cm high (includes lid)

Piping Syringe for icing unfinished or aged



Total length 2.5cm



The item is supplied unfinished or aged. If supplied unaged it will be ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.



Made from lead free pewter alloy.

Pretty Antique Provence Patterned edged coffee pots (2 sizes)



Incredibly fine and detailed tiny tea cups with saucers (2 designs) and mug.

These tiny cups (to scale as far as casting processes allow) are perfectly formed and look beautiful when painted.



The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

The price is for one - use the drop down menu to select quantity then add them to your basket.



Finishes:

Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").

I have photographed them for you in both the unpainted state, a painted finish with a brown wash to age them and also a polished pewter finish. If you choose to paint then age them then try a pale cream, off white colour and then using raw or burnt umber (watered down) wipe them over to create a warm aged appearance.



Cup and saucer design 1 - 7.5mm diameter at widest part (not including the handle) x 5.9mm

Cup and saucer design 2 - 8.3mm diameter ot widest part (not including the handle) x 6.9mm High

Mug - 8.6mm high x 6.5mm

Saucer - 11.5mm diameter x 0.7mm thick

Cups and mugs are between 0.6 and 0.8mm thick

Pretty Antique Provence bowls unfinished

Size

Small bowl 8mm high x 13mm external diameter

These beautiful little bowls are part of the Antique Provence range and come unfinished in dull pewter.

Pretty Antique Provence Patterned edged Gavy Boat





The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

The price is for one - use the drop down menu to select quantity then add them to your basket.



Finishes:

Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").

I have photographed them for you in both the unpainted state and a painted finish with a brown wash to age them. If you choose to paint then age them then try a pale cream as a main base colour and then using raw or burnt umber (watered down) wipe them over to create a warm aged appearance.



9mm high x Main body 9mm x 12mm x 0.6mm thick

Pretty Antique Provence Teapot



Size

Approx. 16mm tall x 17mm wide



This beautiful little teapot is part of the Antique Provence range and has a removable lid ready for some tea and comes unfinished in dull pewter.

The pewter can be polished or painted. If painting please apply a thin layer of metal primer. This will help the coat of paint adhere to the surface.

12th scale Carpet Beater

20mm wide (18mm diam) x 60mm long

When your carpet needs to be dusted hang it up and give it a bash with this carpet beater.

Made from metal and ready for paiting.

Sparrow Tureen unfinished

2cm tall (pot without the lid) x 2.5cm diameter at opening- the perfect size for a nice juicy casserole!

Adorned with flowers and leaves in the prettiest of patterns wth a little bird (possibly a sparrow) resting on a tiny branch on the lid. The sparrow is of course the handle for the lid and the sidehandles are twisted branches.

The tureens are amongst some of my more quirky and pretty items. The ideas for the Tureen can be simple to the most exciting....simply painting the Tureen and displaying it on the shelf or filling it with a wonderful rich gravy and meat with some of the juices burnt and cascading over the side of it.

The item is supplied unpainted.

Mum had these! And some of us will still own them although nonstick may have taken over!

The baking tray for small cakes is ideal if you are wanting to produce fairy cakes or maybe madeleines

3cm x 3cm