Alison Davies

12th Scale Spiral staircase kit

12th scale Spiral staircase kit.

This simply beautiful spiral staircase is copied from a Polish original found in an abandoned house. This is the same staircase that we (Mini Vintage) have used in our Old Mill prototype. In the old Mill we use a 'Bottom Step' + 14 'Step Kits' as described below. This product as available on the Mini Vintage site is sold as 'one kit' suitable for use in the 'the Old Mill'. If you would like any different configuration then please order via www.alisondaviesminiatures.co.uk

Each step has stunning filligree and comes with a beautiful bannister post and rail.

The bottom step is slightly different to the other steps as it has a little base finial to finish it off.

The staircase is sold in "steps" with a bottom step option.

Each step measures approx. 15.25mm high x 37mm deep x 68mm wide

The Upright posts are approx. 81mm high with the handrail adding another 2mm to the height.



Bottom Step Kit contents:

1 x step

1 x Bottom hand rail (this is the longer handrail)

1 x Short top handrail

2 x Bannister posts

1 x Little floor flange

1 x Length 12" steel rod (for you to cut to size) (not shown)



Step kit contents:

1 x step

1 x Bannister post

1 x handrail section




Construction

This is a slightly harder kit to construct as it has to be supported during the build.

You will need superglue and a superglue activator (this simply sets the glue instantly and makes the whole job easier).

Always start with the bottom step but it can be constructed outside of the dolls house and then inserted when finished. Your only issue might be that you wont be able to secure the central rod into the floor and the ceiling. Ideally the floor would be added after the stairs are in position.

18th century Chandeliers (Large)

Sold in kit form these wonderful ceiling candelabras are stunning and would certainly make a statement in any 18th century or later room. In particular if you have a long thin room with a statementdining table then two at either end would be superb.

These are not electrified but the candle holders have been designed to accept a small candle bulb and therefore with a little bit of effort and time these could be electified.





Size

Large 76mm tall x 78mm wide

Pair Pretty Antique Provence salt and pepper pots unfinished

Home / KITCHEN / Pair Pretty Antique Provence salt and pepper pots unfinished

Pair Pretty Antique Provence salt and pepper pots unfinished



Size

Approx. 5mm tall



These beautiful little salt and pepper pots are part of the Antique Provence range and come unfinished in dull pewter.

The pewter can be polished or painted. If painting please apply a thin layer of metal primer. This will help the coat of paint adhere to the surface.

Small weight scales

12th scale weight scales

Length 20mm (including dish) x 17mm diam of dish.

The little kitchen scale would be ideal in a messy kitchen table scheme. It comes in 4 sections, the large base, the star shaped dish supports, the dial face (not the dial) and the dish. To create a glass face try using doming resin. It's incredible stuff. Simply mix the two parts together 1:2 and then using a cocktail stick drip it onto the dial face...the beauty is that it remains raised like a dome...it's very realistic. You can buy button/dome resin online

Made from metal and ready for painting.

12th scale Food Scoop

Food Scoop

3cm long x 0.9cm wide

Whether scooping for flour or grain this is the perfect sized scoop and ideal for use in a shop.

Made from metal and ready for paiting.

Pretty Antique Tureen

The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

Finishes:

Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").

Size : Medium 24mm high to top of lid x 24mm diameter (widest part not including handles)

Free Standing Rectangular frames

Free Standing Rectangular frames

Large 2.7cm x 5.3cm (oval 2cm x 3cm)
Mediuml 2.3cm x 4.5cm (oval 2.2cm x 2.5cm)

Supplied unpainted in an easy to assemble kit with the frame and the rear support seperate ready for gluing together.



These frames are so versatile and can be placed in almost any room in the house and set off a scene perfectly. They could contain small portraits or maybe silhouettes. Available in 4 sizes with possibly the small size being the most obvious choice if you are not sure which size to choose.



Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.



Made from either metal or resin (metal shown in image).

Antique Provence Jug (Small)

Pretty Antique Provence Patterned edged jug

Ideal jugs for loads of uses - the little one is a milk jug and ideal for anyone who wants to serve coffee with milk.
The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

Pretty Antique Provence Jug

Pretty Antique Provence Patterned edged jug

Ideal jug for loads of uses including holding a display of pretty flowers.

The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

The price is for one

15mm high x 12mm diameter x 0.6mm thick

32 Printed Antique Box Templates (Not assembled)

These are printed and posted to you

These lovely antique box templates are symbolic of 18th and 19th century design.

There are 32 boxes ranging from hat boxes, lid boxes and file boxes. They are supplied on 3 x A4 sheets (glue and sissors not included).

They are all printed using 12 colour print process onto 180gsm matt card - perfect for mini boxes.



To assemble you will need to carefully cut out the templates with either a sharp craft knife or small sissors. Score all folded edges with a blunt edge and ruler then fold. Glue using a suitable paper/card glue such as modge podge or PVA.

You can also add additional aging to remove any white edges using brown stamping ink or soft pastel.

Short SCANDINAVIAN 19th century BENCH 12th scale Unpainted KIT

Short SCANDINAVIAN 19th century BENCH

This item is supplied as a kit and unpainted.
The item is made of mdf. It is a very simple to assemble kit. Supplied with easy to use instructions to show you how to construct the model and some tips to achieve a simple and effective build.
This item is not supplied with glue or paints.
Approx 10cm wide x 4cm deep x 7.7cm high

Carved Stool with Putti 1860

A Carved STOOL WITH PUTTI 1860 unpainted

The design is supplied as a kit and unfinished. It is very easy to assemble. Insert for upholsery currently not supplied. Made from resin, Unfinished in kit form

Dimensions

Height 5cm x Length 5.5cm x Depth 5cm (floor to seat 3.7cm)

Small 8cm High Corner wash basin bathroom sink 12th scale Unpainted

Corner wash basin bathroom sink

This item is supplied unpainted.
The item is made of resin with metal taps.

Approx 8cm high

Made from Resin

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

19th century shopping till cash register kit

19th century shopping till kit unfinished

Icons of the 19th century these magnificent shopping tills are simply wonderful. The miniature kit comes in 3 sections and is very easy to assemble. I do not supply any paper "price" tickets or clear glass for the non digital readout! The casting of the tiny little keys is incredibly complex and occassional one or two might need to be gently bent back into position.

Size

40mm tall x 30mm wide x 26mm deep

The kit is unassembled and comes unfinished in dull pewter.

The pewter can be polished or painted. If painting please apply a thin layer of metal primer. This will help the coat of paint adhere to the surface.

19th century French weather vane kit

19th century Weather vane Kit. Choice of Aged or unfinished. Wall fitting but can also be fitted to a flat surface.

Sizes

Height from top of bird to flat disc 53mm

Flat disc diameter 35mm

Woodworking Dril

Woodworking Drill in two parts

unaged

All drills supplied as a kit for gluing the two parts together

Made from lead free pewter alloy

12th scale

Pair 12th scale French Fire dogs Unpainted

Pair of Fire Dogs

Pair of French firedogs. These are highly detailed and decorative metal cast 12th scale firedogs created to guard the fire. Each cherub faces inward and there is a left and a right in each pair. There is no longer a central length.


The fire dogs are unpainted and made from either resin or metal.


Cherubs firedogs are: 4.5cm high x 3cm wide x 1.25cm deep

Wonderful ornate log basket with Putti

Wonderful ornate log basket with Putti

Supplied in kit form and made from Resin/Pewter

7cm wide x 3cm deep x 7cm high


Easy to assemble

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Woodworking Hammer (Aged)

Made from lead free pewter alloy and Aged by Mini Vintage

Unfinshed

12th scale

19th Century Monkey Toy playing the drum

19th Century Monkey Toy playing the drum ~ UNPAINTED

This little monkey wears a top hat and coat and is ready for painting. If you have a steady hand he would look great painted in some lovely muted tones of old french blue, earthy pink, old red and soft mustard. Ideal for the playroom or something a little quirky to add to your display cabinet of curios!

Unpainted resin
12th scale

SIZES (are approx)

- Small 24th scale or small 12th scale toy for playroom: Height 3cm or 1.25"
- Large 12th scale: Height 5cm or 2"

The kit is not painted.

Vintage Camera ADM95

A step away from my usual 18th century offerings is this rather lovely victorian camera. It comes in 4 sections but does not include a base. It would look wonderful in an office where maybe the occupier has a pile of old film and some photographs ready for framing or filing. I always feel that these types of item lend themselves to story telling. Not only can you indulge your love of all things mini but by adding such items to a room you begin to create a wonderful story. Who owns it? Why do they own it? What do sort of photography do they take? Ideas and imagination are endless and so much fun.

HOVIS bread tins

KIT 12th scale sewing machine

IT for 12th scale Sewing Machine

The painted sewing machine is an example of what the kit will look like when painted.

I was brought up with a sewing machine - my first one not too disimilar to this one. I was about 7 and living in Norfolk. I remember thinking what fun it was spinning the wheel as fast as I could only to end up crushing my finger in the spoke!

The sewing machine is very easy to assemble. It has a little spool winding addition which you glue to the front of the machine. I have to admit the machine is not exactly the same as the original. Any machinists will instantly recognise the flaws! If you want to add a spool of cotton thread to the top you would need to glue it on or you could drill and small hole in the metal and glue in a small pin.

The machine is cast with a little machine foot and needle - some of the images are missing them as I was a little heavy handed with my file.

Size:

Approx. 26mm high x 40mm long x 20mm deep

Letter Opener

This is part of a letter writing collection.
Used to slice open a letter.

2.8cm long

18th Century Swan Dish

18th Century Swan Dish

Size = 2cm wide x 1.3cm high x .8cm deep

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

French Stove

French Stove 19th century

This item is supplied unpainted.
The item is made of a very high grade resin
Approx 6.3 high x 5,4cm wide
Easy to assemble
Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

This delightlful little French stove, similar to our log burners, would have been essential in a 19th century home.
This model has a little drawer that collects the ash from the logs or coal and a door that opens allowing for your own lighting of imitation coals.

The model has a curved rear which is fine when fitting it into a recess but if you are going for a free standing option then the additional back will flatten the rear making it suitable to be positioned anywhere in a room.

High Cistern Toilet WC Victorian Kit

High Cistern Toilet WC Victorian Kit

This item is supplied unpainted.
The item is made of a very high grade resin and metal chain
Approx 17cm high
Easy to assemble although the fitting the chain is a little bit fiddly


Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.



Chrome: The kit is made from resin and if you wish to create a chrome finish then an ideal paint to use is "Chrome" by a company called "Gild" There are other companies who produce similar quality paints. You could always use silver Bronze powder mixed with Ormoline. It produces the same results and the Ormoline can be used with other coloured bronze powders such as gold and bronze.

Follow this link to Ormoline

Follow this link for Bronze Powders

TIP: if you are using any of the above paint then be mindful that if you use a "superglue" spray activator it will dissolve the silver paint (it acts like a thinner) - please don't ask me how I know this!!!!

Hanging hooks ideal for dried flowers, pots, pans and utensils

Hanging hooks ideal for dried flowers, pots, pans and utensils

This item is supplied unpainted.
The item is made of a very high grade resin
Approx 4.1cm high x 3.3cm diameter ( 4.5cm diameter to outer edge of hooks)
No Assembly

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Ornamental fire grate / log burner KIT

Ornamental fire grate / log burner KIT

This item is supplied unpainted.
The item is made of a very high grade resin
Approx 6.7cm high x 7.9cm widest part x 4.1cm deepest part
Easy to assemble Kit in 6 sections

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Wall planters

Wall Planters

This item is supplied unpainted (flowers and foliage are not included)
The item is made of a very high grade resin
Small - height 4.3cm x width 4cm x depth 1.6cm
Medium - height 5.3cm x width 4.9cm x depth 2cm

Easy to assemble
2 sizes to choose from

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Putti Wall Shelf

Louis XVI was the last King of France before the fall of the monarchy during the French Revolution. In 1793 he was executed along with his wife Marie Antoinette by guillotine. The table optimises the pretty delicate design associated with this period

This lovely 12th scale table kit comprises of 4 seperate legs, a centre piece, a small finial and the top section which incorpertates the pretty side decoration.

4.8cm diameter x 6.2cm high

It is easy to assemble. The table has four legs supporting a central brace. In total the kit comes in 7 parts and can be assembled in minutes.

Bistro Table and Chair

Bistro Table and Chair

This item is supplied unpainted.
The item is made of a very high grade resin
Chair height 9.4cm
Table diameter 6cm height 6.4cm

Easy to assemble
Can be purchased seperately

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Free standing dressing mirror - Psyché de l'Impératrice Eugénie

Based on a mirror by Alexandre Georges Fourdinois 1799-1871 French

Psyché de l'Impératrice Eugénie

This item is supplied unpainted.
The item is made of a very high grade resin
Approx 15cm high x 7cm wide
Easy to assemble in 4 sections.
The mirror is not supplied with the "reflective mirror".
The mirror will require a little glue or tacky wax to prevent the mirror from swinging out.

My design has been based on an original mirror created by the renowned Alexandre Georges Fourdinois. The original can be found at the Château de Compiègne and is entitled "Psyché de l'Impératrice Eugénie". This is a beautiful example of mid 19th century Second Empire work.

Some more images of the restoration of the original mirror can be found here: https://www.sylvain-oudry.com/conservation-et-restauration-objets-d-arts-decoratifs/psyche-de-limperatrice-eugenie-a-saint-cloud

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Museum Quality Exhibition Hand Carved Italian Davenport Desk

Museum Quality Exhibition Hand Carved Italian Davenport Desk 19th century

- This item is supplied unpainted.
- The item is made of a very high grade resin with an mdf kit for the rear of the desk
- Approx 10.7cm high 9.4cm wide x 5.2cm deep
- 2 little top drawers open
- Front flap opens to reveal interior
- Easy to assemble

The carving is raised and this allows for easy painting of the pattern should you wish to highlight it in a constrast colour such as gold.

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

A truly stunning example of a 19th century Commode writing desk. The original full size version would have been made for an exhibition to show off the cabinet makers skill. The design is attributed to Pauly CIE Et and the carving Moses Michelangelo Guggenheim 1837-1910.

The Royal Boulle Marquetry Commode 18th century circa 1708

The Royal Boulle Marquetry Commode By Blake Based on a design circa 1708

- This item is supplied unpainted.
- The item is made of a very high grade resin
- Approx 7.1cm high 10.3cm wide x 5.5cm deep
- Drawers open

The original "Marquetry" (the pattern) which would have been made from inlaid wood or gilt metal has been reproduced to that it is raised. This allows for easy painting of the pattern should you wish to highlight it in a contrast colour such as gold.

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

The following information was taken from the 1stDibs website from where the original design was sourced

ref: https://www.1stdibs.com/furniture/storage-case-pieces/commodes-chests-drawers/royal-boulle-marquetry-commode-blake/id-f_38970602/

"This monumental Boulle commode was crafted by Robert Blake, one of the finest and most important English cabinetmakers of his time. It is modeled after the legendary pair of commodes made for France’s King Louis XIV by master ébéniste André-Charles Boulle, which is perhaps the most famous and esteemed of all the treasures now housed at the Palace of Versailles. The original commodes made by Boulle inspired re-interpretations by history’s most esteemed craftsmen. First created and supplied in 1708 by Boulle for Louis XIV’s bedchamber at Versailles, the original pair was one of only four furnishings deemed worthy enough to be rescued from both destruction and sale after the French Revolution. They were placed in the Bibliothèque Mazarine at the Institut de France, where they became known as the Mazarine Commodes, but have since been returned to Versailles.

Phone Telephone 19th Century kit unpainted

12th scale telephone

Made from resin (grey)

Comes as an easy to assemble kit

Finishes:

Supplied unpainted

Ornate Cherub Vase unpainted

Ornate Cherub Vase

This very iconic design of a vase with two cherubs at either end has been given a more ornate twist by creating a more decorative vase onto which they sit.

Ideal for both indoors and outside. Fill with your favourite flowers and leaves or maybe add some moss and have swan perched on it...there are two sizes available. The smallest would also suit 24th scale but also ideal in 12th scale when you only require a smaller vase.

Sold individually

Dimensions

Small: height (top of heads) 3.5cm x Max diameter 2.2cm

Large: height (top of heads) 4.8cm x Max diameter 3.3cm

Men and Womens Boots (Ripley)

Boots

Rugged and textured boots that bring the outdoors into the miniature home.

The price is for a "PAIR" of boots including a box template

I love the detailing of such items and being able to create laces, the rugged grip of a walking boot and the folds of the leather is just fun! Why not place a pair of boots in the entrance of your stately home or maybe there is an area in the house where shoes and boots are put away ready for a Sunday afternoon walk with the dog. However you use them they will bring a smile to the onlooker.

The average length of a boot is around 20mm long

All boots are supplied with a little box template that you can make into a shoe box.

Collection of assorted plates (Amiens)

Plates approx. sizes (diameters):

The measurement are an approximation for all the designs. Divided into small (side plate), Medium (lunch time plate) and Large (dinner plate).

Small 1.4cm
Medium 2.1cm
Large 2.4cm

Made from lead free Pewter or resin and the plates will need a very mild and quick deburr using sandpaper or file to remove any unwanted casting spurs

Decorative French dinner desert bowl

Decorative dinner service items unpainted

Desert Bowl 1.2cm diameter

Made from lead free pewter alloy or resin

Jug (Type D)

JUGS

I simply love the idea of filling shelving, armoires, cabinets etc with jugs, plates, teapots and so forth...an eclectic collection.....

All the jugs are sold individually just choose from the dropdown menu the design and the size that you would like to purchase.

Made from lead free pewter alloy or Resin

Dimensions - height of jug 2.6cm

Coal Hod (12th scale)

12th scale unpainted coal hod

A coal hod is for collecting and storing coal ready for your open fire or aga!

50mm high

12th scale Corbel of a Merman

18th Century French corbel of a merman

These detailed and gorgeous corbels are made from resin (image shows the same design in metal) and very easy to paint. They are copies of originals with florishes of acanthus leaves and drapery.

Use them to support a ceiling feature or maybe as an ornate shelf to display a stunning vase or ornament. For me they would sit pride of place supporting an archway leading into a room.

The price is for one.

12th scale

- 2.7" or 7cm high
- 2.2cm widest point
- 1.3cm deepest point

French 18th Century Putti Firescreen 12th scale UNPAINTED

French 18th Century Putti Firescreen

This item is supplied unpainted and made of Resin

Large Aprox. 10.5cm high

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Tremeau French mirror Mirror with small oval 18th century

In French, trumeau is the word for the thin section of wall between two doors or windows. The word was first used to describe a mirror on that section of wall in the early 1700s. By the middle of the century, it was used to describe a mirror above a mantle.

The original trumeau mirrors were set into wood paneling, or boiserie (bwah-zer-EE), the fancy carved wall-covering of choice in the 17th and 18th centuries. Glass was an expensive resource so at first it was unusual to have even small mirrors set into the decor. As mirror glass became easier to produce in larger squares, it would occasionally be incorporated into paneling.

This lovely 12th scale Tremeau mirror measures externally 11cm high x 6.5cm wide

The large rectangluar insert is 6.7cm high x 4.5cm wide

It is sold without the mirror. TIP: create a paper template, draw around it on acrylic mirror before cutting the mirror.

UNFINISHED 18th Century Antoinette swept Frames

I just love these frames. The chance to find a beautiful painting and then frame it is so much fun. But then you may like to paint your own work of art and have it hanging proudly in your mini gallery. Alternatively you might prefer to create a mirror to hang above a fireplace or table.

The detail in these beautitful frames is defined and will be more visible if you add a wash to your paint finish or gilding.